Card Readers
Pharos supports a variety of cash card, smart card and ID card readers and several non-card logon methods. The DLL files needed to operate these card readers and logon methods can be found on the Pharos disk image. These DLLs are the latest versions available at the time this Pharos product was released. If the files for the card reader you require are not there, you will need to obtain them via the Pharos Systems web site: www.pharos.com.
It is critical that the EPROM or firmware in the card reader used is consistent with the version of Pharos. While we do our best to ensure we are up to date with the latest versions, we have no control over the firmware releases made by card reader suppliers. Check the help documentation for the DLL to ensure the reader and its firmware is supported by the current version.
The following card readers are currently supported:
Card Reader | Bank | Function |
---|---|---|
ABSEC Cash Card Reader |
ABSEC Bank |
Source of ID and Source of Payment |
ABSEC Chip Card Reader |
ABSECChip Bank |
Source of ID and Source of Payment |
ACT Cash Card Reader |
ACT Bank |
Source of Payment only |
BEAR Cash Card Reader |
BEAR Bank |
Source of Payment only |
CartaDis Card Reader |
CartaDis Bank |
Source of Payment only |
CDT Cash Card Reader |
CDT Bank |
Source of Payment only |
CopiCard Cash Card Reader |
CopiCard Bank |
Source of ID and Source of Payment |
Danyl Cash Card Reader |
Danyl Bank |
Source of Payment only |
Danyl Chip Card Reader |
DanylChip Bank |
Source of ID and Source of Payment |
DebiTek Chip Card Reader |
DebitTekChip Bank |
Source of ID and Source of Payment |
DebiTek Magnetic Cash Card Reader |
DebiTekMagnetic Bank |
Source of ID and Source of Payment |
Digital Access Control Cash Card Reader |
Digital Bank |
Source of Payment only |
EPS POS Card Reader |
EPS Bank |
Source of ID and Source of Payment |
F2000 Card Reader |
F2000 Bank |
Source of Payment only |
Hecon touch key |
Hecon Bank |
Source of ID and Source of Payment |
ID and Password Dialog Box Logon |
Default Bank |
Manual logon |
ID Card – Serial Reader Logon |
n/a |
Generic swipe card DLL (card reader attached to a Pharos Station serial port) |
ID Card Keyboard Wedge Logon |
n/a |
Generic swipe card DLL (card reader attached to the Pharos Station keyboard connection) |
InterCard Cash Card Reader |
InterCard Bank |
Source of Payment only |
Intercard Chip Card Reader |
IntercardChip Bank |
Source of Payment only |
Intercard Station Card Reader |
IntercardStation Bank |
Source of Payment only |
ITC Cash Card Reader |
ITC Bank |
Source of ID and Source of Payment |
ITC Chip Card Reader |
ITCChip Bank |
Source of Payment only |
Jamex Coin Reader |
Jamex Bank |
Source of Payment only |
Key Press or Mouse-Click Logon |
Mouse Move or Key Click Bank |
Manual logon |
Maas Card Reader |
Maas Bank |
Source of Payment only |
Monitor System |
Monitor Bank |
Source of ID and Source of Payment |
NetCam Cash Card Reader |
NetCam Bank |
Source of ID and Source of Payment |
POSLink Card Reader |
POSLink Bank |
Source of ID and Source of Payment |
Saturn Card Reader |
Saturn Bank |
Source of ID and Source of Payment |
SmartCentric Cash Card Reader |
SmartCentric Bank |
Source of ID and Source of Payment |
TechProd Card Reader |
TechProd Bank |
Source of Payment only |
VFJ Cash Card Reader |
VFJ Bank |
Source of Payment only |
XCP Cash Card Reader |
XCP Bank |
Source of Payment only |
XCP firmware 2.04B Cash Card Reader |
XCP Bank 1 |
Source of ID and Source of Payment |
Each of these DLLs is available for selection when creating or editing a Pharos Bank - in most cases, a Bank that uses the required DLL should already exist in the Pharos Database.
Tips for Choosing a DLL
To access internal Pharos accounts, use the ID and Password Dialog Box DLL.
To access an account held in an online billing system that uses a swipe card, use (as appropriate for the card reader):
- ID Card - Keyboard Wedge Logon
- ID Card - Serial Logon
- Monitor System
To access a cash card, use the relevant cash card reader from the list.